![]() ![]() But it’s also similar to an air-filled pneumatic tire because of the layered rubber. ![]() Just like a cushion tire, a solid pneumatic tire is also made of solid rubber. Lastly, cushion tires are less expensive to manufacture and are easier to maintain. ![]() Because of the increased amount of rubber, the tire will last a long time while also providing a smooth ride for your operator. The hard outer surface of cushion tires is specifically made to reduce wear and tear on the wheels and the floors on the site. Aside from being closer to the ground, the tires allow you to turn your forklift on a smaller radius, which is why they’re chosen for facilities with tight spaces. These are made of smooth and solid rubber that is placed around a band of metal - which is why they’re also called press-on tires. Keep on reading to learn more!Ĭushion tires are specifically made for sites with smooth surfaces, such as inside a warehouse or on loading docks. To help you, here is a simple guide on these components. For specialty tires, there are also polyurethane and non-marking forklift tires.Ĭhoosing the right type of tire will affect the productivity and safety of your forklift. Whether you’re operating on smooth floors or rough terrain, there are two main forklift tire types for you to choose from - cushion and pneumatic. As the part that will be directly exposed to the environment on your site, you need to make sure that you’re using the right tires for your application. When buying a forklift, you need to consider its design - from the cabin, engine, mast, safety features, to the tires. If the tread is completely worn away, it’s time to replace the tires.Forklift Tire Types: A Simple Guide JanuWhat are the different types of forklift tires? Your tires won’t be able to grip the ground without it. It may seem obvious, but make sure your tires’ tread isn’t worn away. Under-inflated tires can contribute to poor traction, and over-inflated tires could lead to blow out. Quick Tip: Make sure you consistently check the tire pressure of your pneumatic tires. Pneumatic tires have more flex than solid pneumatics which increases the surface area contacting the ground and improves traction. We recommend you use pneumatic tires instead of solid pneumatic. ![]() The best way to get better traction is to increase the surface area connecting with the ground. When compared with a personal vehicle, a forklift is much heavier - even without a load - which makes sufficient friction even more essential when operating your forklift in slippery conditions. You can get stuck easier than you might expect. Reduced traction is a major concern as snow and ice accumulate. Instead you'd have two smooth cushion tires in the front and two traction cushion tires in the back. The front and back tires can differ, but both front tires and both back tires must be the same type.įor example, you can’t have a smooth cushion tire on the front right and a traction cushion tire on the front left. When it comes time to replace the tires, ensure both sides of the forklift are the same tire type. You’ll often be able to switch from smooth cushion to traction cushion, or pneumatic to solid pneumatic tires, but it is rare you can go from a cushion tire to a pneumatic tire and vice versa. We're often asked: "Can you put pneumatic tires on a cushion tire forklift?" Your forklift’s wheels and frame are generally designed for a specific tire type (usually pneumatic or cushion), so it is best to verify with your local dealer and your forklift’s manual if you want to go with a different tire type than what is recommended. Take into consideration your application, forklift and work environment when choosing a tire type. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |